Search:
img img img img

img

SpaDealers > Start Page > Hot Tubs > AquaClarus

1944000I - AquaClarus Filtration System



A common question is how many times you can swim in the water in your hot tub. Our response is usually that the same water should not be used multiple times unless there is treatment. It is possible to get rid of bacteria with chemicals such as chlorine, but that does not make the water clean and after that the bath water is used it usually looks quite uninviting. Cloudy and greyish. To remove such pollution, filtering is required. For traditional filtering required connections in a hot tub for incoming and outgoing water. At freezing, is there the risk of freeze damage if not protected with insulation.

Now there is an easy way to keep the water clean in the hot tub. AquaClarus is a filtration system that hung over the tub edge. Fits all hot tubs on the market. Depending on the quality of the water it should run between ½ -2 hours. Impurities trapped in the filter can be easily removed and cleaned. There are also exchange filter. The filter system is suitable for hot tubs and small pools up to 10m ³.

NOTE! We also recommend that germicidal agents used in all bathers in the hot tub or pool. It is also important that the pH value of the proper level, or between 7.2-7.6








Function of the filter: The filter is adjustable vertically. The water is suctioned from the surface, at a rate of up to 4000 l/hour, and is then passed through a "pre-filter" that catches larger particles. The water then passes through a removable filter that can be cleaned after use. At the bottom of the filter the purified water is pushed out and creates a circulation in the water so that impurities from the bottom are also lifted up to the surface and passed through the filter.

Because of that, the filtration system also works well as a "water stirrer" for hot tubs with heaters that lack a circulation system, such as interior heaters. Connection is made via a cable to a regular 230V wall socket. Between pump and socket is a 12 V transformer to the pump that is rated at 70W.












Filter cartridge that is used in the AquaClarus Filtration System

Innder diameter 55mm, outer 130mm and height 200mm. The filter which has a surface area of 1,2m² effectively takes care of impurities in the water supplied by the pump. It needs to be rinsed now and then depending on usage.









Here you can see the AquaClarus in use



Spare parts

SI CODE DESCRIPTION
1 XR416I Galleggiante / Floater Skimmer
2 XR410S Cestello / Basket
3 XR312EN Set 3 spugne / 3 foam set
4 XR314S Cartuccia / Cartridge SK8
4 XR328S Cartuccia / Cartridge SK10
4 XR323S Cartuccia / Cartridge SK12
5 XR425I26 Corpo skimmer / Body h. 260mm
6 A57S52050GI Pompa / Pump 2000lt/h 12V
6 A59S54050GI Pompa / Pump 4000lt/h 12V
* XR140B Kit Rotore e girante / Rotor and Impeller kit SI2000
* XR183B Kit Rotore e girante / Rotor and Impeller kit SI4000
7 XR424IRI Base / Base for skimmer
8 XR401S Gancio regolabile / Adjustable Hook
8 XR405I Gancio flexi / Flexi Hook
9 XR406B Transformer 66VA (SI2000)
9 XR408B Transformer 70VA (SI4000)
10 XR415I SKIMVAC

1944000I3KW - AquaClarus + 3kW electric heater

AquaClarus can also be combined with a 3 kW thermostatically-controlled electrical heater, connection and hole for water circulation. It is a simple but well-working solution that can be used for filtration and combined with electrical heating during all the seasons. The heater also has an insulated module that is fastened on the side of the Hot Tub.